Professional Installation

NüBatten offers installation services for its products in the Toronto, Ontario area. Please contact us to discuss your project details and receive a quote for installation.

 

DIY Installation

Installing NüBatten Panels out of the box is a breeze. Here’s what you’ll need:

• Drill
• 12-16 Screws (black recommended, 1 ½  inch in length)
• Level
• Pencil

To start, measure your space and decide where you’re going to install the panels. Some people center the panels on their wall for a framed look, while others install them flush with the floor for a more grounded aesthetic. Whichever you decide, measuring your space and even holding your panels in different places will help you finalize your mounting locations.

NOTE: If you’re mounting into drywall only, be sure to insert the appropriate anchors before drilling.

Once all anchors have been installed and/or studs have been located, put the first panel back in place and insert the screws. We recommend a total of 6-8 screws per panel, spaced evenly around the edges and closer to the middle of each panel, as shown. The screws are meant to be placed in the felt, not the wood slats. 

Fit the second panel next to the one you just installed and repeat this process. The tongue and groove pattern of the felt and the slats will allow you to fit each panel side-by-side while maintaining the uniformity in spacing between slats. 

The felt from the second panel will fit behind the last slat of the first panel, completely hiding the seam from view and allowing you to install endless panels next to each other to make one, uniform accent or feature wall.